Products Programmers, programming tools

MC68HC705B16/32, MC68HC705X16/32, MC68HC05B6/8/16/32, MC68HC05X16/32 SMART EEPROM Programming Tool

• Easy to use DOS, Windows 95/98/NT/2000 software
• Onboard processor
• Device selection by 4 jumpers
• 2 color LEDs indicates mode of operation, security condition (check option available without PC)
• LPT port self-check function on a board
• 52PLCC PGA socket on a board and additional 2 adaptors for 64QFP device in complete
• Additional items you'll need to use this tool:
1) Host: A 32 Bit x86 based or Pentium PC with a free LPT communication port.
2) Power supply: An 12 Volt / 100 mA
For more information see ETL Uniprog User's Guide
• Download adaptor PCB in GERBER format and print it in
ViewMate
NOTE: If jumper selected incorrect - No any risk to lose data. Storage EEPROM contents guaranteed !!!
IMPORTANT NOTE: On the D53J mask set (MC68HC05X32), DIV10 is forced in bootstrap mode. So 20 MHz Crystal must be used with this device.
IMPORTANT NOTE for MC68HC705X32 (0D69J):
MC68HC705X32 (0D69J) Operation Guide