•
In circuit / on board EEPROM/FLASH programming.
• Communication with PC via a serial port
• Win 32 control software including editor
• High - Speed Programming
• 80QFP, 112QFP and 144QFP programming adapters
• Easy to use Windows 98/NT/2000 software ver. 1.8 hc912prog18.zip
ver. 1.7 hc912prog17.zip
ver. 1.6 hc912prog16.zip
• Onboard processor ATmega64 allow to Firmware
Update to new versions
• 1x2 color LED indicates mode of operation,
power supply status
• Additional items you'll need to use this
tool:
1) Host: A 32 Bit x86 based or Pentium PC with a
free Com1-8 port or USB
port
2) Power supply: An 12 Volt / 500 mA
- For more information see HC912
Programmer User's Guide
and 912/9S12
Quick MCU tutorial
• Download adaptor
PCB
in GERBER format and print it in ViewMate NOTE:
Stable working of programmer in In-circuit programming
interface can be guaranteed if MCU clocked from
stable oscillator (ceramic resonator) not capacitor!
If capacitor used, please replace it with ceramic
resonator. See schematic
diagram
for details.
