Products > Programmers, programming tools

NEC uPD17011GF + GAMMA II (M327),
GAMMA III (M327) EEPROM programmer

 

• Easy to use DOS, Windows 95/98/NT/2000 software
• Hardware configuration by 3 jumpers
• In-circuit programming
• Onboard processor, automatic control
• 2X2 color LEDs indicates mode of operation
• Full EEPROM address range Read/Write
• Additional items you'll need to use this tool:
1) Host: A 32 Bit x86 based or Pentium PC with a free Com1-2 communication port.
2) Power supply: An 12 Volt /120 mA
• Tested on: NEC D17011GF E91, E93, E95
- For more information see ET2 EEPROM Programming Tool